Soundon New Energy Technology Co,.Ltd.
Pursuing excellence ,creating a better world
Add to Cart
High Rate And Good Cyclelife NCM Cathode Caterial For Electric Tools , Energy Storage
| Item | Units | SN1B(Power type) Typical value/ Control standards | |
| Particle size distribution | D10 | µm | 5.9(≥4.0) |
| D50 | µm | 8.6(6.0～12.0) | |
| D90 | µm | 13.0(≤20.0) | |
| Specific surface area | m2/g | 0.32(0.30～0.60) | |
| pH | / | 11.10(10.80～11.40) | |
| Tap density | g/cm3 | 2.55(≥2.30) | |
| Compact density | g/cm3 | 3.50(≥3.40) | |
| Initial discharge capacity (vs.Li, 0.2C) | mAh/g | 154.3(≥152.0) | |
| Initial charge-discharge efficiency | % | 88.1(≥86.0) | |
| Capacity retention ration after 300 cycles (RT)) | % | 81.0(≥80.0) | |
| Capacity retention ration after 800 cycles (55℃) | % | 89.2(≥85.0) | |
| Application | / | PHEV/BEV | |
Description:
Name: Lithium Nickel-Cobalt-Manganese Oxide
Type: SN1
Appearance: Black powder, no agglomeration
Crystallogram: No impurity phase
Specific capacity is about 145mAh/g. Compact density is about 3.6g/cm3. Cycle is about 2000 times at RT. The particle of LiNi1/3Co1/3Mn1/3O2 is orbicular, which has a good consistency and thermal stability, high safety performance, long cycle life at high temperature, and high rate charge-discharge performance. This material was widely used in various slap-up power batteries, such as laptops, electric tools, electric bicycles, electric motorcycles and electric vehicles etc.
